If you would like to know the ‘mileage’ for your Panasonic plasma TV, you can try the method below. Taken from lowyat forum, originally posted by tien8tien.
# Hold down the {VOL -} button ON THE PLASMA.
# At the same time, Press the {Status} button (the button on the left of the 0 (zero) button) on the remote control 3 times. (this must be done within 3 seconds of the {VOL-} button being pressed).
# Release both the {VOL -} button and the {Status} button and wait for about 2 seconds.
# The Service Menu will be displayed.
# Use the RED buttons to move to “SRV-TOOL” screen
and press the {OK} button to access it.
# HIGHLIGHT the box on the right side of the last option: (Navigate by using the arrow buttons on the remote)
_______________________________________
| PTCT :00.00.00.00.00 | HIGHLIGHT HERE |
# Then press and hold the {MUTE} button on the remote for 3 seconds.
TIME = Hours and Minutes of Operation.
COUNT = Times the Plasma was Powered On.
# To exit, press & hold the {Return} button on the Remote for few seconds. The TV will power reset and goes back to the original program that you are watching.
Do you have a code (or sequence on the remote) for resetting the Panasonic plasma TV on factory settings? In case you do something wrong with above
Thnx in advance
Z
By: Z on September 24, 2009
at 9:14 pm
We just moved into a new house and bought this TV. We had it shipped from CA to VA and it was in perfect condition when it arrived. We were a little concerned about having this shipped across country. Well worth it. We are very pleased with this TV. Highly recommend it.
By: 58 inch Panasonic Plasma on February 14, 2010
at 11:32 am
[…] useful. How do we see how long the tv has been on for? Anyone…… Please. I found this: Clicky but am too chicken to try it since it's going into the service menus. Anyone feeling […]
By: Panasonic G20 Owners Thread - part 2 - Page 44 - AVForums.com on April 19, 2010
at 3:54 pm